Textile Quality Control · 4-Step Inspection

Quality Control for Custom Textiles — 4-Step Inspection, 98.5% Yield Rate

Galink runs a documented 4-step inspection from incoming materials to AQL pre-shipment checks across towels, blankets, and bags. Each batch leaves the line only after colorfastness, shrinkage, and stitch-strength tests are logged; the 98.5% yield rate covers every order category on a 12-month rolling basis.

Request QC Docs Factory Capacity

Suzhou, Jiangsu · OEM/ODM · AQL 2.5 default

What is your quality control process for custom towels and bags?

Galink's textile quality control process is a 4-step inspection — incoming materials, in-line checks, AQL pre-final sampling, and pre-shipment final inspection — applied to every towel, blanket, and bag order at our 5,000 ㎡ Suzhou factory under AQL 2.5 default. Inspections follow AQL 2.5 (general inspection, default; can adjust per buyer contract to AQL 1.0 or 4.0). The 98.5% yield rate (defect-free) we publish is measured against this 4-step gate, not against a single end-of-line check.

Step 1 — Incoming material inspection: Every fabric roll, yarn lot, and accessory batch is checked against the buyer's spec sheet before cutting.
Step 2 — In-line inspection: Floor inspectors walk the line at fixed intervals to catch print defects, stitch skips, and color drift mid-run.
Step 3 — AQL pre-final inspection: Statistical sampling based on lot size; defects classified critical / major / minor.
Step 4 — Pre-shipment final inspection: Random carton opening, weight check, and packaging review before container loading.

Why buyers trust it: every step is logged, every batch carries a QC reference code, and lab test reports (colorfastness, shrinkage, GSM) are issued on request — see certifications & ESG for the audit chain behind the numbers.

Galink QC inspector walking production line reviewing printed towels

What is your defect rate and how do you measure it?

Galink publishes a 98.5% yield rate (defect-free), measured as the share of finished units passing all 4-step inspection without any critical or major defect, on a 12-month rolling basis across all towel, blanket, and bag orders shipped from the Galink factory floor. The complement — 1.5% defect rate — captures units flagged at any of the four gates (incoming, in-line, AQL, pre-shipment) and excluded from shipment.

Metric	Value	Measurement window
Yield rate (defect-free)	98.5%	12-month rolling, all towel / blanket / bag orders
Defect rate	1.5%	Same window; critical + major defects, all gates
Re-inspection rate after rework	< 0.5%	Of reworked lots that re-enter the gate

How it's calculated:

Numerator — units that pass AQL pre-final inspection with zero critical / major findings.
Denominator — total finished units across all shipped orders in the rolling window.
Audit trail — every batch has a QC code; buyers can request the per-batch yield sheet.

Why this matters for buyers: the 98.5% yield rate is published, not just claimed, because lot-level data is auditable — see factory capacity & on-time delivery for how yield links to our 96% on-time rate.

How do you inspect incoming materials before production?

Before any cut, fabric rolls are inspected at the incoming gate against the buyer's spec sheet — covering weight (GSM), width, hand feel, color shade versus lab-dip, and visible flaws — to catch defects before they enter production and inflate downstream rework cost and lead time. Materials that fail are segregated; the supplier is informed within 24 hours.

Incoming check	Method	Pass criterion
Fabric weight (GSM)	Cut-and-weigh sample, 3 points per roll	Within ±5% of spec
Width	Steel tape, 3 points per roll	Within ±1 cm of spec
Color shade	Visual + spectrophotometer vs lab-dip	ΔE ≤ 1.5 against approved lab-dip
Hand feel	Buyer-approved reference swatch	Match reference on file
Visible flaws	Full roll spread on inspection table	No holes, stains, slubs, misweave beyond AQL

What we reject: any roll that fails GSM, width, or color shade is quarantined and not released to cutting; replacement rolls are re-inspected on arrival.

Galink incoming fabric roll inspection table with shade-card comparison

What happens during in-line and pre-final inspection?

During production, floor inspectors walk the line at fixed intervals to catch defects; at end-of-run, an AQL pre-final inspection statistically samples the lot to classify defects as critical, major, or minor before the batch moves to packing, sealing, and shipping from the factory. In-line catches process drift early; AQL is the formal release gate before final packing.

In-line cadence (per shift)

Trigger	Action
Start of shift	First 5 units pulled and checked
Every 30 minutes	Sample 3–5 units per line
After every color / style change	Full re-check first 10 units

AQL pre-final inspection levels (default AQL 2.5; adjustable per contract)

Defect class	AQL (default)	Examples
Critical	0	Hole, foreign contamination, broken needle left in product
Major	2.5	Print misregistration > 3 mm, stitch skip > 5 cm, color off-shade
Minor	4.0	Slight weave unevenness, loose thread, packaging scuff

Galink AQL inspection table with sampled towel batches

What final inspection checks happen before shipment?

Before any container is sealed, Galink runs a pre-shipment final inspection — random carton opening, packed-unit weight check, label and poly-bag review, and a final visual scan against the buyer's approved golden sample — on every shipment leaving the factory floor. This is the last gate before the goods leave the factory.

Pre-shipment checklist

Random cartons opened and re-counted vs packing list
Packed-unit weight checked against target (within tolerance)
Inner poly-bag and outer carton labels verified (style, size, color, quantity)
Barcode / carton number scan logged against QC code
Sample stack held against approved golden sample for color and hand-feel
FOB / CIF / DDP shipping marks applied per buyer instruction

Outcome: a signed pre-shipment inspection report accompanies every order; buyers receive the digital copy with shipment documents.

Galink pre-shipment inspector checking finished towel cartons before container loading

Which fabric testing standards do you follow?

Galink tests against publicly named industry methods — colorfastness to washing (ISO 105 C06), to light (ISO 105 B02), to rubbing (ISO 105 X12), dimensional change (AATCC 135 / ISO 5077), and GSM by cut-and-weigh — issuing reports per batch. Reports are issued per batch on request.

Test	Standard	What it measures
Colorfastness to washing	ISO 105 C06	Shade change after repeated wash cycles
Colorfastness to light	ISO 105 B02	Fade resistance under artificial light
Colorfastness to rubbing (crocking)	ISO 105 X12	Dye transfer to dry / wet cloth
Dimensional change (shrinkage)	AATCC 135 / ISO 5077	Length / width change after wash
Fabric weight (GSM)	Internal cut-and-weigh	Mass per square meter
Stitch strength	Internal pull-test	Seam tensile, ≥ buyer-specified value

Note: these are public industry test methods applied to each batch — distinct from any factory-level management certification. Buyers can request the latest lab report per batch via contact us.

How can buyers request QC reports and lab test data?

Every Galink order ships with a pre-shipment inspection report; lab test reports (colorfastness, shrinkage, GSM, stitch-strength) for the specific batch are issued on written request within 3 working days, free of charge to all buyers, regardless of order size or destination. This is how buyers verify the 98.5% yield rate behind the marketing line.

How to request

Free with every order — pre-shipment inspection report (PDF) attached to shipment documents.
On request, per batch — colorfastness, shrinkage, GSM, stitch-strength lab reports.
For repeat buyers — quarterly consolidated QC summary across orders.
For audit — factory walk-through and QC records review available by appointment.

What to include in your request: order number, batch / lot code (printed on carton label), and the specific test(s) you need. See contact us for the request form.

See results in production: See QC results in real cases across resort, Amazon private label, promo, spa, and events projects.

Request QC Docs / Lab Test Report

Quality Control FAQ

What is AQL sampling in textile inspection?

AQL — Acceptable Quality Level — is the statistical defect threshold used in pre-shipment textile inspection. Galink defaults to AQL 2.5 for major defects (critical 0, minor 4.0); buyers can request AQL 1.0 or 4.0 per contract for stricter or looser sampling on their specific lot.

How do you inspect towels before shipping?

Galink runs a 4-step gate on every towel, blanket, and bag order — incoming fabric, in-line checks during production, AQL pre-final inspection on the finished lot, and a pre-shipment final check on packed cartons. Every batch carries a signed pre-shipment report attached to the shipment documents.

What is your beach towel defect rate?

Galink publishes a 98.5% yield rate (defect-free) on a 12-month rolling basis across all towel, blanket, and bag product categories. The 1.5% complement captures units rejected at any of the four QC gates — incoming, in-line, AQL, or pre-shipment — and excluded from shipment.

Can I get the lab test report for my batch?

Yes. Send your order number and batch / lot code via the contact us page; per-batch colorfastness, shrinkage, GSM, and stitch-strength reports are issued within 3 working days, free of charge to all buyers regardless of order size or destination market.

Do you run tests in-house or send to a third-party lab?

In-house lab covers GSM, dimensional change (shrinkage), colorfastness, and stitch strength on every production batch. For buyers requiring third-party verification, Galink coordinates samples with named independent labs and shares the verified report directly with the buyer's QC team at no extra cost.

4-step QC · 98.5% yield rate · AQL 2.5 default